manual
110
X2 ConfiguraTion manual
7. mulTiple amounT- This option must be set for the denomination (value) of the currency in the
selected cassette (option <5>). Typical values are 5, 10, 20, 50,
or 100 notes.
D Press <7> on the keypad. Enter the denomination value in
the data entry dialog screen. Press <enTer> when completed.
8. doCumenT Type- This option selects the cassette for setup/
changing note conguration parameters or other media.
NOTE: Only NMD dispensers (multi-cassette) can be setup
for non-cash documents. TDM-200/250, though multi-
cassette, only dispense “Cash”. Single cassette dispensers always dispense “Cash”.
D Press <8> to toggle between Cash or Non-Cash. When Non-Cash is selected, the following two
options “Non-Cash Item Description” and “Secondary Item Description” are activated.
9. non-Cash iTem desCripTion- This option is used for
a brief description of the non-cash item in the selected
cassette.
D Press <9> on the keypad. Enter a brief description of the
non-cash item. Press <enTer> when completed.
0. seCondary iTem desCripTion- This option provides
a location for other information of the non-cash item. It is used in conjunction with the “Description”
above.
D Press <0> on the keypad. Enter a brief description of the non-cash item. Press <enTer> when
completed.
f1. noTe ConfiguraTion (nmds only)- This option enables conguring the note-specic parameters
of the currency in the selected cassette. The available parameters are:
1. Bill widTh 4.varianT
2. Bill lengTh 5. Code
3.value
D Press <F1> on the function keys. The following pages describe these parameters.