manual
100
X2 ConfiguraTion manual
9. sTaTus moniToring (hosT speCifiC requiremenT)- This option, when enabled (checked), sends
operational status information to the host processor. During certain transactions, a message is sent:
1. TransaCTion requesT message
2. ConfiguraTion TaBle download requesT (working key download)
3. hosT ToTals download requesT
4. reversal requesT
D Press <9> to toggle between checked (enabled) and unchecked (disabled).
D 0. hearTBeaT message (hosT speCifiC requiremenT)- This option, when enabled (checked),
instructs the terminal to initiate a Working Key Download to the host processor. This allows the
processor to determine if a particular terminal is still in operation.
NOTE: When this option is enabled, the Heartbeat Delay Interval (next option) will be active to set the
time period interval.
D Press <0> to toggle between checked (enabled) and unchecked (disabled).
f1. hearTBeaT delay period- The parameter sets the time interval of the Heartbeat Message that will
be sent. It is specied in minutes.
D When the Heartbeat Message is enabled, press <F1> (upper left function key next to the display).
Enter a value (in minutes) between 1-999. Press <enTer> to accept.
eXample: Thirty will initiate a Working Key Download every 30 minutes. Be advised this will put
the terminal “Termporarily Out of Service” for a short duration until the key has successfully been
downloaded.