manual
Terminal ConfiguraTion
99
3. reseT sequenCe numBer- This option resets the sequence that is printed on the journal printout and
receipt to “00000000”.
D Press <3> on the keypad to reset the sequence number.
4. defaulT language- This function selects the default language for all customer screen transactions
and management function screens.
NOTE: This function is only active if the option to allow customer selection of a language has been
disabled through the optional screens and optional buttons functions.
D Press <4> on the keypad to cycle through the available languages.
5. defaulT TransaCTion Type- This function changes the default transation types that are presented
to the customer. The available options are “Withdrawals”, “Transfers”, “Balance” and “Non-cash
Purchase”.
The default is “None” (all available options are presented to customer).
NOTE: If a specic transaction type is selected, it will only be presented to a customer if the selected
type has been disabled through the optional screens and buttons functions.
D Press <5> on the keypad to cycle through the available transaction types.
6. defaulT aCCounT Type- This function operates the same as “Transaction Types”. The available
options are “Checking”, “Savings” and “Credit Card”. The default is “Checking”.
D Press <6> on the keypad to cycle through the available account types.
7. ouT of serviCe on low paper- This option determines if the terminal will go “Out of Service” when
a low receipt paper condition occurs or stays “In-Service”.
D Press <7> to toggle between checked (terminal “Out of Service”) or unchecked (terminal “In-
Service”).
8. ouT of serviCe on prinTer error- This option determines if the terminal will go “Out of Service”
when a printer error occurs or stays “In-Service”. If this option is unchecked, the terminal remains
in-service and the customer will be prompted that a receipt will not be printed. At that point they can
accept or discontinue the transaction process.
D Press <8> to toggle between checked (terminal “Out of Service”) or unchecked (terminal “In-
Service”).