Owner Manual

cdu firmware pc loader utility
Triton Systems ©
3
07103-00054
4. Run the utility loader by clicking on Start > All Programs > Triton > CDU Loader.
5. In the drop down box, choose thet COM port where the dispenser cable is plugged in.
**Note**
Screen shots are for example purposes only. Firmware version may dier.
If you are using a USB-to-serial adapter, you can determine the COM port to use by going to Control
Panel > Device Manager in Windows,. Locate the USB-to-serial device name under ports. e COM port
associated with this device is shown.