Manualshelf

Owner Manual

ManualsBrandsTriton Systems ManualsOtherArgo
123456789
3
LOCK REMOVAL ALL LOCKS CONTROL PANEL AND FASCIA
1. Open the control panel or fascia door. Return
the lock to the locked position. Leave the key in
the lock to act as a handle.
2. Remove the 1 (one) bolt holding the latch cam,
and remove the bolt, lock washer and latch cam.
Replace the bolt back on to the lock to retain the
inner tumbler mechanism.
Bolt
Washer
Latch Cam
3. Remove the nut securing the lock, and remove
the lock from the front.
Nut
Removal of the current lock assembly is the same for all cabinets, both the control panel and front fascia
doors. The picture provided is generic to all removals.