manual
Triton Systems ©
8
e rear service panel (RSP) for FT models is a touchscreen display that provides convenient user access for
day-to-day management functions from inside the facility. For RSP to function, ATM may not be in the midst of
a customer transaction or logged into Management Functions menu from the front control panel. e RSP will
remain in idle mode until a user logs in.
-
e terminal operates as a menu-driven system. Messages and menu options on the LCD display guide user ac-
tions. e desired menu option is selected by pressing the on-screen key of your choice. For the purpose of secu-
rity, many screens timeout aer a preset interval, usually 120 seconds. e time out length may vary depending
on the function being performed.
When a screen time out occurs, a message is presented that asks the user if more time is needed. If the user
chooses Cancel, the welcome screen is presented. If Enter is chosen, the user returns to the function that was
active prior to the timeout. If the user does not make a selection within an additional 30 seconds, the terminal
will automatically return to the welcome screen.
Aer the unit has been turned on, the top menu will be displayed. From the top menu, users may activate the
terminal to perform customer transactions, or enter the terminal management area. If a menu option is not
chosen within 30 seconds, the terminal will automatically default to the customer welcome screen. In the event
of a power interruption, the terminal will automatically begin accepting customer transactions aer power is
restored.