manual
Triton Systems ©
69
/
1. Navigate to Management Functions > Diagnostics > General I/O Diagnostics.
2. Press LED Indicators. is function will ash all LEDs on the terminal for 5 seconds.
3. Press Audio Output. is function will play a sound le and audio text through the terminal speakers, or via
headphones if attached.
4. Press Head Phone Interrupts. is function reports whether headphones can be detected when inserted and
removed.
5. Press Congure LED Flash Rate to adjust the ash rate of the LEDs. Options include 0 Hz (always on/no
ash), 0.5 Hz, 1.0 Hz, or 2.0 Hz.