manual
Triton Systems ©
46
( )
is function allows the user to inject a new ID into a cassette. e NMD dispensing mechanisms use cassettes
that possess internal memory which enables a cassette to store its own identication code.
e Inject New Cassette ID function has no direct correlation to the physical position of the cassette within the
dispenser. In most cases, cassette A will be placed in the top feed channel, cassette B in the second, and so on.
is is not a requirement for NMD cassettes since the ID code allows the dispenser to locate the cassette where
ever it is placed.
1. Navigate to Management Functions > Diagnostics > Dispenser.
2. Press Inject New Cassette ID.
3. Press desired cassette (A, B, C, D) you wish to rename.
4. Remove cassette from top feed channel.
5. Insert cassette (A, B, C, D) you wish to rename into top feed channel.
6. Press Enter to begin operation.
7. At prompt, remove cassette from top feed channel and place in desired slot.
8. Press Enter to continue.