manual
Triton Systems ©
39
is function allows user to set the ATM back to factory default settings. All current parameters that have been
modied from factory default settings will be deleted. is function does not reset the journal or T9 keypad.
1. Navigate to Management Functions > Diagnostics > Terminal Status.
2. Press Restore Default Parameters. Depending on soware, a list of congurations may be presented, one of
which must be selected.
3. Pressing Enter on the pop-up dialog will begin the processing of erasing current terminal parameters.
is function saves the current terminal parameters to a USB drive inserted into an available USB port on the
main board.
1. Navigate to Management Functions > Diagnostics > Terminal Status.
2. Ensure USB drive is installed into an empty USB port on main board.
3. Press Save Parameters to External Storage. Press Enter on the pop-up dialog.
4. Using the on-screen keyboard, name parameter le, then press Enter to begin the processing of exporting
current parameters to external USB drive.