manual
Triton Systems ©
19
34. Press Enable Communication Header to toggle the option on or o. is information is provided by the
host processor.
35. If Enable Communications Header is toggled on and shows a check mark, press Communications Header.
36. Enter communications header using the on-screen keyboard. is case-sensitive information is provided by
the host processor.
37. Press Enter and Return.
38. Aer these steps have been completed, press the Next button in the bottom, right corner of the screen to
continue to the next set of requirements.
**Note**
If user 1 and user 2 passwords have already been set, option 1 will be Change Passwords.
39. Press Set Passwords (for the T9 keypad). PCI requires dual authentication, meaning two users must be pres-
ent to complete the T9 customer keypad conguration.