manual
Triton Systems ©
139
is function begins the process of updating the keypad rmware.
1. Install USB drive loaded with rmware into an empty USB port on the main board.
2. Navigate to Management Functions > Key Management.
3. Press Update EPP Firmware.
4. Using the T9 keypad, enter the user 1 password, then press Enter.
5. Using the T9 keypad, enter the user 2 password, then press Enter.
6. Press desired lename on screen to highlight. If no les are shown, press the Refresh button. Files from USB
drive should then appear under Available Options on the screen. Files must not be saved in a folder on USB
drive.
7. Press Enter and Return to begin soware installation.
8. Press Enter on the pop-up dialog.
9. Terminal will reboot, then begin installing new soware les.