manual
Triton Systems ©
134
is function allows user to enter MAC master keys or PIN master keys, and requires two user access passwords
in order to complete. e two required passwords are not the same as the passwords used to enter the Manage-
ment Functions menu. Both the user 1 and user 2 passwords for the T9 keypad must be changed from the default
code of 00000000 before master keys can be downloaded. If user passwords have not been set, the Enter Master
Keys option will be unavailable until passwords have been changed.
Caution
Master keys and instructions are provided by host processor and vary from customer to customer. e following
steps are an example of what a user should see when entering master keys. Check digits shown are for example
purposes only.
1. Navigate to Management Functions > Key Management.
2. Press Enter Master Keys.
3. Using the T9 keypad, enter the user 1 password, then press Enter. Password must be eight characters.
4. Using the T9 keypad, enter the user 2 password, then press Enter. Password must be eight characters.
5. Press Congure Key Set 1.