manual

Triton Systems ©
124
5. Press Primary Phone Number. Using the on-screen keypad, enter phone number as directed by host proces-
sor, then press Save and Return. is phone number is used to contact the host processor during customer
transactions.
6. Press Backup Phone Number. Using the on-screen keypad, enter phone number as directed by host proces-
sor, then press Save and Return. is phone number is used to contact the host processor during customer
transactions.
7. Press Predial to toggle on (check mark) or o (no check mark) as directed by host processor. is function
allows the terminal to dial out to the host processor and establish a connection as soon as a customer swipes
their card.
**Note**
Only enable the communication header if directed by host processor. Incorrect data in this eld will prevent
customer transactions.
8. Press Enable Communication Header to toggle on (check mark) or o (no check mark) as directed by host
processor. is function is only available with select host processors.
9. Press Communication Header, if applicable. Using the on-screen keypad, enter the information provided by
host processor, then press Save and Return. is information is case sensitive.
10. NUA Number. is option is not selectable for dial-up communications. See Communication (TCP/IP) for a