manual

Triton Systems ©
120
5. Press Primary Host Address. Using the on-screen keypad, enter host address as directed by host processor,
then press Save and Return. is IP address is used to contact the host processor during customer transac-
tions. Information will be entered in this format: hostaddress:port.
6. Press Backup Host Address. Using the on-screen keypad, enter host address as directed by host processor,
then press Save and Return. is IP address is used to contact the host processor during customer transac-
tions.
7. Press Permanent TCP/IP Connection to toggle on (check mark) or o (no check mark) as directed by host
processor. When enabled, the terminal will stay connected to host processor aer each transaction.
**Note**
Only enable the communication header if directed by host processor. Incorrect data in this eld will prevent
customer transactions.
8. Press Enable Communication Header to toggle on (check mark) or o (no check mark) as directed by host
processor. is function is only available with select host processors.
9. Press Communication Header, if applicable. Using the on-screen keypad, enter the information provided by
host processor, then press Save and Return. is information is case sensitive.
10. Press NUA Number, if applicable. Using the on-screen numeric keypad, enter the information provided by