manual
Triton Systems ©
114
4. Press Mix Method. Press desired option to toggle on (check mark), then press Save and Return. is option
allows selecting the pick method for dispensers that employ multiple cassettes with the same denomination.
— e Minimize method minimizes the number of bills dispensed, and depletes an entire cassette before
using another when both cassettes have the same denomination. For example, a three cassette dispenser
with $10 bills in cassette A and $20 bills in cassettes B and C will ll a $150 transaction request with 1 bill
from cassette A and 7 bills from cassette B. Cassette C will not be used until cassette B was empty.
— e Minimize EW method means the terminal rotates cassettes lled with the same denomination aer
every customer transaction. For example, if cassettes A and B have the same denomination, the rst trans-
action aer a terminal restart will use cassette A. e next transaction will use cassette B. Each subsequent
transaction will rotate between the cassettes.
5. Press Fast Cash 1. Use the on-screen numeric keypad to enter the desired fast cash amount, then press Enter
and Return. During a withdrawal transaction, fast cash options may be presented to enable the customer to
select amounts from a convenient list of options. e amounts do not have to be in set order, though typical-
ly, they increase in value from top to bottom.
6. Press Fast Cash 2. Use the on-screen numeric keypad to enter the desired fast cash amount, then press Enter
and Return.
7. Press Fast Cash 3. Use the on-screen numeric keypad to enter the desired fast cash amount, then press Enter
and Return.
8. Press Fast Cash 4. Use the on-screen numeric keypad to enter the desired fast cash amount, then press Enter
and Return.
9. Press Fast Cash 5. Use the on-screen numeric keypad to enter the desired fast cash amount, then press Enter
and Return.
10. Press Cassette Parameters. Make the necessary changes, then press Save and Return. Press Save and Return
again to save changes and return to previous menu. See the Cassette Parameters section for more informa-
tion.