manual

Triton Systems ©
108
10. Press Out of Service on Printer Error to toggle on (check mark) or o (no check mark). is functions al-
lows the user to choose if the terminal will automatically go out of service when a printer error occurs, or if it
will remain in service. If this option is toggled o (no check mark), a pop-up dialog will notify the customer
that a receipt will not be printed if an error occurs.
11. Press ATM Monitoring to congure the operational status information sent to host processor. Do not
attempt to alter these properties unless certain of the results. Incorrect settings may cause communication
failure. Settings or changes in this menu are advanced conguration options, and should be provided by host
processor.
— Press Status Monitoring to enable, disable, or choose advanced monitoring options. When enabled, this
function sends status information to the host processor during the following message types: any customer
transaction request, working key download, host totals download request, or a reversal request.
— Press Heartbeat Message to toggle on (check mark) or o (no check mark). When enabled, this function
initiates a working key download to the host processor at a set interval. is allows the processor to deter-
mine if a terminal is in operation.
— Press Heartbeat Delay Period when Heartbeat Message is enabled. Using the on-screen numeric keypad,
enter the heartbeat delay period (1-999 minutes), then press Enter and Return. is function will initialize
the Heartbeat Message operation at the interval set.
— Press Journal Upload to toggled on (check mark) or o (no check mark). is function initiates a journal
upload to the host processor during any host communications.
— Press Enable Time-Specic Heartbeat to toggled on (check mark) or o (no check mark). is function
will initialize the Heartbeat Message operation at a specic hour and minute of each day.
— Press Hour of Day when Enable Time-Specic Heart beat is toggled on (check mark). Use the on-screen
numeric keyboard to set desired hour (0-23) for terminal to initialize the Heartbeat Message operation.
Press Enter and Return.
— Press Minute of Day when Enable Time-Specic Heart beat is toggled on (check mark). Use the on-
screen numeric keyboard to set desired minute (0-59) for terminal to initialize the Heartbeat Message
operation. Press Enter and Return.
12. Press Save and Return to save changes and return to the previous menu.