manual
Triton Systems ©
10
Triton ATMs require a certain amount of conguration in order to place them into operation. is section lists
the minimum conguration requirements to bring an X3 ATM into service.
**Note**
An error code of 246 will be displayed upon the rst startup. You must change the master password before the
ATM will go into service. An appropriate password must be entered to view the Management Functions menu.
Once the ATM is powered on, log into Management Functions by:
1. Press the Management Functions key on top menu screen. e Management Functions menu may also be
accessed by pressing and holding the <CTRL> key, depressing the 1 key, then releasing both.
2. Enter user ID and password to access Management Functions menu. e factory default settings are 00 for
the user ID and 1234 for the password so the default log on will be 001234.
3. Press Enter.
e ATM can be congured by using the Triton Conguration Wizard, or by completing the following steps. e
following steps are the minimum items that must be congured to put an X3 ATM into service.
( )
Once all steps listed above have been completed, the ATM should be in communication with the host processor and ready
to begin processing transactions. is completes the basic set up requirements for an X3 ATM.
More conguration items
can be found in the following chapters.