manual
Triton Systems ©
81
For your convenience, the video T5/T9 Keypad Battery Replacement by Triton Systems/ATMGurus is available
on YouTube.
**Note**
Spare batteries can be purchased as P/N 01300-00025.
1. Perform a proper shutdown via Management Functions > System Parameters > Shutdown Terminal. Turn
power switch on the power supply to the o (O) position.
2. Uninstall the customer keypad.
3. Remove battery cover from the keypad. Set cover aside for reinstallation. Do not unplug current battery.
Caution
Do not remove the battery from the T9 keypad without rst connecting a new battery. Keypad will be perma-
nently damaged.
4. Plug replacement battery into spare battery connection.
5. Aer new battery is installed, disconnect and remove the old battery.
6. Secure new battery in compartment and replace battery cover.
7. Install keypad in unit, then power ATM on.
**Note**
Removing the T9 keypad from terminal will result in a 626 error code. Keypad must be reactivated via
www.tritonatm.com before ATM will go into service.