manual
Triton Systems ©
80
Caution
Avoid using abrasive cleaners on any surface of the terminal. Do not spray liquid cleaner directly on unit, inside
or out.
e ATM front panel is highly durable, resisting scratches and nger smudges. However, occasional cleaning of
the control panel and plastic enclosure may be desirable. A so dry or slightly damp cloth may be used for clean-
ing. For best results, use a weak solution of mild detergent and water.
e LCD display of the ARGO is covered is tempered glass with a capacitive touch layer on the back.
1. Safely power the ATM o via Management Functions > System Parameters > Shut Down Terminal.
Caution
Do not spray liquids directly onto the screen as they may run down inside the unit and cause damage. Do not
use cleaners containing alcohol or ammonia.
2. Dampen a so, lint-free cloth with water. Gently wipe the screen to remove smudges, ngerprints, dust, etc.
LCD screen may also be cleaned with a screen cleaner kit purchased from an electronics store. ese kits
contain anti-static solution without alcohol or ammonia.
3. Wipe screen with a dry, lint-free cloth aer cleaning to remove excess moisture.
4. Power ATM on.
Special cleaning cards (Triton P/N 05010-00024) are available for proper maintenance of the card reader. ese
wae-type cleaning cards may be used with multiple types of card readers. e card reader should be cleaned at
least once per month, although it may be necessary to clean card reader more oen in high trac locations.
**Note**
Cleaning cards are designed for single use.
1. Remove cleaning card from sealed pouch.
2. Insert cleaning card into card reader. Move in and out several times.
3. Remove cleaning card and turn over to use other side.
4. Re-insert cleaning card. Move in and out several times.
5. Remove cleaning card from reader and discard.