manual

Triton Systems ©
77
 
(manager feature only)
**Note**
Aer each key press, the lock will beep. Aer the nal digit is entered, the lock will beep twice. A triple beep sig-
nals an invalid entry. Always perform this operation with the door open. If a mistake is made, wait 30 seconds,
then repeat steps.
1. Enter manager code and hold down last digit of code until the lock emits two sets of double beeps.
2. Press 2. Lock should beep once. User is now temporarily disabled.
— lock beeps once if a user code is already installed/programmed
— lock beeps twice if function was successful
— lock beeps three times if function was unsuccessful
 
(manager feature only)
**Note**
Aer each key press, the lock will beep. Aer the nal digit is entered, the lock will beep twice. A triple beep sig-
nals an invalid entry. Always perform this operation with the door open. If a mistake is made, wait 30 seconds,
then repeat steps.
1. Enter manager code and hold down last digit of code until the lock emits two sets of double beeps.
2. Press 1. Lock should beep once. User is now reinstated.
— lock beeps once if a user code is already installed/programmed
— lock beeps twice if function was successful
— lock beeps three times if function was unsuccessful
 
(manager feature only)
**Note**
Aer each key press, the lock will beep. Aer the nal digit is entered, the lock will beep twice. A triple beep sig-
nals an invalid entry. Always perform this operation with the door open. If a mistake is made, wait 30 seconds,
then repeat steps.
1. Enter manager code and hold down last digit of code until the lock emits two sets of double beeps.
2. Press 3. Lock should beep once. User is now permanently removed.
— lock beeps once if a user code is already installed/programmed
— lock beeps twice if function was successful
— lock beeps three times if function was unsuccessful