Guide
Triton Systems ©
7
1. When prompted via Management Functions, remove cassette by grasping handle and pulling from dispenser.
2. If cassette has a lock, use the security key to unlock cassette.
3. Open cassette by simultaneously pressing the green release button and liing the lid. Flip lid back completely,
allowing it to rest on at surface.
4. Pull the packer plate to the front of the cassette (toward the handle). Ensure the packer plate is fully back.
Maintain pressure on the packer plate as needed while loading notes. Refer to the sticker located on the in-
side cover of cassette for loading instructions.
**Note**
Level the notes. Single notes should not protrude from the bundle. Make sure the bundle leans evenly against the
plate.
5. Place the currency into the cassette. Allow at least one inch of clearance between the retracted packer plate
and the currency. is will allow the packer plate to compress the currency. Do not overll.
6. Release the packer plate against the notes.
7. Extended the white pawls on each side of packer plate.
8. Close cassette lid. Release button should pop out allowing the lid to mate cleanly with the body of the cas-
sette. If applicable, lock cassette with key.
9. Using handle, slide the cassette into the dispensing mechanism. Make sure cassette is seated rmly.
10. Repeat steps for remaining cassettes.
11. Continue with Cassette Close or other procedure via Management Functions.