manual

MANAGEMENT FUNCTIONS
83
FUNCTION: LOW RECEIPT PAPER
FACTORY DEFAULT: ‘OUT OF
SERVICE’
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select the PRINTER SET-
TINGS option.
3.) Choose the LOW RECEIPT PAPER option.
D
ESCRIPTION:
After selecting the LOW RECEIPT PAPER ON/OFF option, a screen dis-
playing,” WHEN RECEIPT PAPER BECOMES LOW, THE ATM WILL
BE OUT OF SERVICE” (or IN SERVICE depending on terminal setup).
Change to IN SERVICE or OUT OF SERVICE by pressing the Screen Key
next to the appropriate text and pressing the EXIT key.
Selecting the IN SERVICE options will allow the terminal to continue to
operate after it senses a Receipt Printer Paper Low condition (Error Code
183). Selecting this option will allow the terminal to operate with low or
no receipt paper in the terminal.
Selecting the OUT OF SERVICE option will allow the terminal to report
a Receipt Printer Paper Low condition (Error Code 183), and will place
the terminal in an OUT OF SERVICE condition until the receipt paper is
replenished.
E
RROR CONDITIONS:
Error Code 183 – Receipt Printer Paper Low will take the terminal OUT OF
SERVICE. To restore the terminal to normal operation the paper must be
replenished and the Reset Error button pressed after the terminal has been
reset and is displaying the OUT OF SERVICE screen.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750