manual

MANAGEMENT FUNCTIONS
79
FUNCTION: ADMINSITRATION PASS-
WORD
FACTORY DEFAULT: ‘987654’
ACCESS INSTRUCTIONS:
1.) Select the PASSWORD MAIN-
TENANCE option from the
MANAGEMENT FUNCTIONS
screen.
2.) Select the ADMINISTRATION
PASSWORD option.
D
ESCRIPTION:
The ADMINISTRATION PASS-
WORD is used to perform daily man-
agement functions. This password
DOES NOT allow access to the TER-
MINAL CONFIGURATION menu.
This password can only be changed
when the MASTER PASSWORD is
used to enter the Management FUNC-
TIONS area. Use the options provided
to VIEW or CHANGE the password,
as shown in the figures below. When
the VIEW option is selected, the cur-
rent password will be displayed for a
few seconds. When changing the pass-
word, it must be entered twice, because
the characters entered are not displayed
(an asterisk (*) is displayed in place of
each character, for security reasons).
The password length can range from
4 to 12 characters.
E
RROR CONDITIONS:
A number of feedback screens may
appear during password entry. These
screens can appear if the second pass-
word entry did not match the first, you
entered an invalid password, or the
password you entered was too short
(less than 4 characters).
VIEW
CHANGE
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750