manual

MODEL 91XX/97XX CONFIGURATION MANUAL
66
FUNCTION: SCAN CARD
FACTORY DEFAULT: N/A
A
CCESS INSTRUCTIONS:
1.) Select DIAGNOSTICS from
the MANAGEMENT FUNC-
TIONS screen.
2.) Select MORE DIAGNOS-
TICS.
3.) Select the SCAN CARD op-
tion.
D
ESCRIPTION:
The SCAN CARD function reads
a card and displays the information
imprinted on its magnetic strip.
This can be done on a customer
card that doesn’t seem to work in
the Cash Dispenser. If the customer
complains of card read errors, first
make sure that he or she is inserting
the card correctly. Then try to read
the card with SCAN CARD. If the
card can be read properly, the infor-
mation from track 1 and track 2 will be displayed. A card need only have a
readable track 2 to operate successfully in the Cash Dispenser.
A series of prompt screens direct the user to first INSERT the card to be
scanned (shown above) and then to REMOVE it, after which the results of
the scan are presented, as shown in the following:
E
RROR CONDITIONS:
If the card is damaged or not a standard format, the screen will display an
error message. If this happens, the card cannot be used for transactions on
the Cash Dispenser.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750