manual

MANAGEMENT FUNCTIONS
63
FUNCTION: ADVANCED (9100/9705)
F
ACTORY DEFAULT: N/A
A
CCESS INSTRUCTIONS:
1.) Select DIAGNOSTICS from
the MANAGE-MENT FUNC-
TIONS screen.
2.) Select MORE DIAGNOS-
TICS.
3.) Select the ADVANCED op-
tion.
The ADVANCED menu makes three options available that are only used
when a TDM-100 dispensing mechanism is installed in the cash dispens-
er.
PRINT DISPENSER DATA REPORT - Selecting this function prints the
“TDM STATUS” report. This report provides useful information that can
assist a service technician to determine the current status of the TDM-100
dispensing mechanism.
The following information is printed on the TDM STATUS report.
1. Feed Sensor status (is Clear or Blocked).
2. Exit Sensor status (is Clear or Blocked).
3. Reset Since last status (Yes or No) indication that the dispensing mecha-
nism has been reset since the last status check.
4. The average thickness = (Feature not supported at this time).
5. Status of last dispense
a. Error reported: (No Error or number of the error code that occurred
during the last dispenses.)
b. bill Dispenser = (Number of bills dispensed)
c. Bill Rejected = (Number of bills rejected)
6. Click Counters (0 - 81) - Each click counter represents an Error Code
for the TMD-100 dispenser. Refer to Table 7-6 for a description of
these codes.
7. Total - Indicates the number of times a documented TMD-100 error code
has occurred. This is a cumulative total from the time the dispenser
was first installed in the cash dispenser and can not be reset.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750