manual

MANAGEMENT FUNCTIONS
53
FUNCTION: TEST RECEIPT PRINTER
(9750)
F
ACTORY DEFAULT: N/A
ACCESS INSTRUCTIONS:
1.) Select DIAGNOSTICS from
the MANAGEMENT FUNC-
TIONS screen.
2.) Select the TEST RECEIPT
PRINTER option.
D
ESCRIPTION:
This command will print two lines
of text on the receipt printer and
then advance and cut the paper. The
text should be 42 characters wide.
The remainder of the information
on the TEST RECEIPT PRINTER
print out is terminal configuration
data. If the printer test fails to print
two lines of 42 characters, fails to
advance the paper, or fails to cut the
paper, contact your service provider
for assistance. A return code of ‘00’
indicates a successful printer test.
Press the cancel key to return to the
DIAGNOSTICS main menu.
E
RROR CONDITIONS:
If any code other than ‘00’ is dis-
played there may be a problem in
the Printer or Printer Controller
Board.
Sample RECEIPT PRINTER test results.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750