manual

MODEL 91XX/97XX CONFIGURATION MANUAL
46
FUNCTION: STATUS
FACTORY DEFAULT: N/A
A
CCESS INSTRUCTIONS:
1.) Select DIAGNOSTICS from
the MANAGEMENT FUNC-
TIONS screen.
2.) Select the STATUS option.
D
ESCRIPTION:
The STATUS command is used to
check the status of four functional areas of the dispensing mechanism. These
areas are the current Status of Count Sensors, the current Double Detect
status, the current average thickness of the documents being dispensed, and
the current average length of the documents being dispensed. Any of the
following sets of return codes will indicate that all of the areas are oper-
ating normally:
1.) ‘40 50 xx xx’
2.) ‘50 50 xx xx’
3.) ‘44 50 xx xx’
4.) ‘54 50 xx xx’
“xx xx” is the current average thickness and length of the currency dispensed.
These values will very for each type (SDD, MiniMech or TCD-100) of single
denomination installed.
The cancel button must be pressed to return to the diagnostic’s menu.
E
RROR CONDITIONS:
If any code other than what is indicated above is displayed contact your
service provider for assistance.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750