manual

MODEL 91XX/97XX CONFIGURATION MANUAL
4
Notification of Changes in Telephone Company Equipment: The telephone
company may make changes in its facilities, equipment, operations or pro-
cedures that could affect the operation of the equipment. If this happens,
the telephone company will provide advanced notice in order for you to
make necessary modifications to maintain uninterrupted service.
Repairs and Returns: If telecom compatibility trouble is experienced with
the Automated Teller Machime, you may contact for repairs and warranty
information:
Triton at 1-228-868-1317
Triton Systems of Delaware, Inc.
522 East Railroad Street
Long Beach, MS 39560
If the equipment is causing harm to the network, the telephone company
may request that you disconnect the equipment until the problem is re-
solved. Repairs should be made only by qualified factory representatives.
Party Lines: The Automated Teller Machine must not be used on party
lines.
Alarm Equipment: The Automated Teller Machine should have its own
dedicated phone line. Do not install the Automated Teller Machine on the
same line as alarm equipment.
Electrical Safety Advisory: Telephone companies report that electrical
surges,typically lightening transients, are very destructive to customer
equipment connected to AC power sources. This has been identified as a
major nationwide problem. A commercially available, power surge sup-
pressor, is recommended for use with the Automated Teller Machine to
minimize damage in the event of an electrical surge.
CANADIAN IC COMPLIANCE NOTICE:
The Industry Canada label identifies certified equipment. This certification
means that the equipment meets telecommunications network protective,
operational and safety requirements as prescribed in the appropriate Ter-
minal Equipment Technical Requirements document(s). The Department
does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible
to be connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of con-
nection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative