manual

MODEL 91XX/97XX CONFIGURATION MANUAL
32
FUNCTION: CHANGE SCHEDULE
FACTORY DEFAULT: N/A
A
CCESS INSTRUCTIONS:
1.) Select CLOSE from the MAN-
AGEMENT FUNCTION
screen.
2.) Select SCHEDULE CLOSE.
3.) Select CHANGE SCHED-
ULE.
D
ESCRIPTION:
This function is used to set the time, in hours and minutes, at which the
terminal will automatically initiate contact with the processor and perform
a close operation. The time is entered in the form ‘HH:MM:SS’ (hours, min-
utes, seconds). Do not enter the ‘:’ characters separating the fields, just the
fields themselves. Press CLEAR to erase everything and start over. Press
the BACKSPACE key to back up and erase a single character. Press QUIT
to escape without doing anything. Press SET TIME to load the entered
time into the clock.
The Cash Dispenser will not let you enter an invalid number for hours or
minutes. The clock will properly handle the roll over to the year 2000.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750