manual

SECTION 3 - MANAGEMENT FUNCTIONS
257
2. Password Required - When
“Enter Master Keys” is selected,
you will be prompted to enter two
(2) passwords. If this is an initial
setup, the default password is six
(6) zeros (000000) for both. You
will then be prompted to change
passwords.
3. Change Password (Initial Setup)
- The VEPP requires that no de-
fault password can be entered. If
a user enters the default password,
the VEPP will force the user to
change them before they can enter
keys.
4. Change User Passwords (cont)
- This screen allows the user(s) to
select which password to change.
If any password is the default val-
ue the VEPP will only allow these
two functions to be selected.
5. Change User Passwords (cont)-
If this is an initial setup, the cur-
rent password will be six (6) zeros
(000000). Enter a new password
(twice). A screen prompt will
apppear if the passwords was
changed successfully. DO
NOT use weak passwords (Ex:
111111,123456)