manual

ENCRYPTING PIN PAD (EPP) UPGRADE
238
entering PIN and/or MAC Master
keys)
Check Digits - Displays en-
cryption key check digits.
2. Password Required - When
“Enter Master Keys” is selected,
you will be prompted to enter two
(2) passwords. If this is an initial
setup, the default password is six
(6) zeros (000000) for both. You
will then be prompted to change
passwords.
3. Change Password (Initial Set-
up) - The VEPP requires that no
default password can be entered.
If a user enters the default pass-
word, the VEPP will force the
user to change them before they
can enter keys.
4. Change User Passwords (cont)
- This screen allows the user(s)
to select which password to
change. If any password is the
default value the VEPP will only
allow these two functions to be
selected.
5. Change User Passwords (cont)
- If this is an initial setup, the
current password will be six
(6) zeros (000000). Enter a new
password (twice). A password
consists of six (6) numbers, no
characters. A screen prompt
will apppear if the passwords
was changed successfully. DO
NOT use weak passwords (Ex:
111111,123456).
6. Enter Master Keys - This screen
allows selection to enter the Mas-
ter keys. You MUST enter PIN