manual

SECTION 3 - MANAGEMENT FUNCTIONS
237
K
EY MANAGEMENT
ACCESS INSTRUCTIONS:
1. From the M
AIN MENU screen,
select C
ONFIGURE PROCESSORS.
2. From the C
ONFIGURE PROCESSORS
screen, select option (2) for K
EY
M
ANAGEMENT.
D
ESCRIPTION:
The K
EY MANAGEMENT function
provides access to the ATMs functions
that control the method of entry for
MAC Master Keys and/or PIN Master
Keys, downloading the PIN Working
Keys, and displaying the Check Digits.
The new VEPP requires that two key
parts for each key are loaded. After
this screen will be a screen to indicate
that the second part must be entered.
Then the “Enter” Function key will
be displayed to load the second key
part. After the second key part is
loaded, the terminal will prompt if
any additional key parts need to be
loaded.
The following sequence will be dis-
played from the K
EY MANAGEMENT
screen:
1. Enter Master Keys - Select this
option to enter the encryption
keys.
Download Working Keys - Se-
lect this option to download the Working Keys. (Must be selected after
Two (2) passwords are required
before entering keys. The defaults
are six (6) zero’s ‘0 0 0 0 0 0’ that
MUST
be changed. After keys
have been loaded, you
MUST
download the Working keys from
the processor.