manual

ENCRYPTING PIN PAD (EPP) UPGRADE
228
M AIN M ENU
ACCESS INSTRUCTIONS:
1. Access Management Functions by
entering your password. The M
AIN
M
ENU screen will be displayed.
D
ESCRIPTION:
The Main Menu screen allows the ser-
vice provider/terminal operator to
access the following Management
functions:
1. Configure Terminal. Used to configure operating parameters for the
ATM terminal.
2. Configure Services. Used to select transaction types, account types,
and surcharging setup.
3. Configure Processors. Used to configure up to four (4) Host/Processor
specific parameters. *Note: Configure Processors PRIOR
to
Configuring Services!
4. Cassette Service. Allows the desired cassette(s) to be placed I
N
S
ERVICE
(* This option available for multi-cassette dispensers).
5. Diagnostics.
This function performs self-tests on the major components
to help determine and isolate any malfunctions or errors.
6. Close. Used to perform Cassette Close, Day Close, Trial Close, and
Schedule Close functions.
7. Journal. Journal data is either stored in an external Electronic Journal
or imbedded in the dispenser firmware (9100 terminals with a TDM
dispensing mechanism). The details of each transaction are stored
in the journal’s memory and can be retrieved at a later date. When
needed, just the information desired can be recalled and a printout of
the records made.
Procedure for entering Alphanumeric Characters
To enter a digit 0-9, press the key that has that digit. To enter a letter, first press
the <CTRL> key (blank key) or <Blue> key (96XX models), then press the
key that has the letter you want on it. The first press of the key will display
the first character above the number. Subsequent presses will display the
characters in sequence. When the character you want is displayed, press the
<RIGHT ARROW> key to ‘lock in’ the character. If your next character is a
letter, you must press the <CTRL> or <Blue> key again.