manual
MANAGEMENT FUNCTIONS
199
FUNCTION: STATUS MONITORING
FACTORY DEFAULT: DISABLED
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Choose MORE.
4.) Select ATM MONITORING.
5.) Select Status monitoring.
D
ESCRIPTION:
Status monitoring is a feature that is available with selected processor soft-
ware. When enabled the terminal will send operational status information
to the processor during certain transactions with the processor. The status
information is sent in a data field that is part of any of the following mes-
sages sent to the processor:
1.) A Transaction Request Message
2.) Configuration Table Download Request Message (Working Key Down-
load)
3.) Host Totals Download Request Message
4.) Reversal Request Message.
Turn this feature on by selecting the ENABLE option on this screen. Se-
lect DISABLE to inhibit the operation of the STATUS MONITORING
feature.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750