manual

MANAGEMENT FUNCTIONS
195
FUNCTION: BACKUP ALARM NUM-
BER
FACTORY DEFAULT: NONE
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Choose MORE.
4.) Select TRITON CONNECT.
5.) Select ALARM NUMBERS.
6.) Choose BACKUP.
D
ESCRIPTION:
The BACKUP ALARM NUMBER function is used to enter a backup tele-
phone number that the terminal can use for calling a Triton Connect computer
to report alarm conditions.
When this function is selected, the current phone number is displayed (if
nothing appears on the screen, no number is set). Select CHANGE to blank
the current entry, and then enter the desired phone number. The phone num-
ber may be up to 30 digits long. It can also contain a dialing prefix, such as
a ‘9’ for an outside line, if necessary. If you need to pause after the prefix,
place a comma in the number for a two-second delay at that point. Press the
<BLUE> key, then the <0> key, followed by the <RIGHT ARROW> key
to select the comma character. Make sure to enter the long distance prefix
‘1’ if you are dialing an 800 number or a toll long distance number. Do not
enter dashes in the number.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750