manual

MODEL 91XX/97XX CONFIGURATION MANUAL

192

FUNCTION: BACKUP NUMBER

FACTORY DEFAULT: NONE

CCESS INSTRUCTIONS:

1.) Select TERMINAL CONFIGU-

RATION from the MANAGE-

MENT FUNCTIONS menu.

2.) Select SET TERMINAL PA-

RAMETERS.

3.) Choose MORE.

4.) Select TRITON CONNECT.

5.) Choose BACKUP NUMBER.

ESCRIPTION:

The BACKUP NUMBER function is used to enter a backup number that the

terminal can use for calling back the Triton Connect computer.

When this function is selected, the current phone number is displayed (if

nothing appears on the screen, no number is set). Select CHANGE to blank

the current entry, and then enter the desired phone number. The phone num-

ber may be up to 30 digits long. It can also contain a dialing preﬁx, such as

a ‘9’ for an outside line, if necessary. If you need to pause after the preﬁx,

place a comma in the number for a two-second delay at that point. Press the

<BLUE> key, then the <0> key, followed by the <RIGHT ARROW> key

to select the comma character. Make sure to enter the long distance preﬁx

‘1’ if you are dialing an 800 number or a toll long distance number. Do not

enter dashes in the number.

RROR CONDITIONS:

There are no error conditions directly associated with this function.

THIS COMMAND IS USED IN THE:

9100 9110 9700 9705 9710

9750