manual

MANAGEMENT FUNCTIONS
191
FUNCTION: PRIMARY NUMBER
F
ACTORY DEFAULT: NONE
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Choose MORE.
4.) Select TRITON CONNECT.
5.) Choose PRIMARY NUMBER.
D
ESCRIPTION:
The PRIMARY NUMBER function is used to enter the number that the
terminal can use for calling back the Triton Connect Host Computer.
When this function is selected, the current phone number is displayed (if
nothing appears on the screen, no number is set). Select CHANGE to blank
the current entry, and then enter the desired phone number. The phone
number may be up to 30 digits long. It can also contain a dialing prefix,
such as a ‘9’ for an outside line, if necessary. If you need to pause after the
prefix, place a comma in the number for a two-second delay at that point.
Pressing the <BLUE> key first, then the <0> key, followed by the <RIGHT
ARROW> key to select the comma character. Make sure to enter the long
distance prefix ‘1’ if you are dialing an 800 number or a toll long distance
number. Do not enter dashes in the number.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750