manual

MODEL 91XX/97XX CONFIGURATION MANUAL

186

FUNCTION: RESET/TEST MODEM

FACTORY DEFAULT: N/A

CCESS INSTRUCTIONS:

1.) Select TERMINAL CONFIGU-

RATION from the MANAGE-

MENT FUNCTIONS menu.

2.) Select SET TERMINAL PA-

RAMETERS.

3.) Select TELEPHONE.

4.) Select the MODEM SETUP

option.

5.) Select RESET/TEST MO-

DEM.

ESCRIPTION:

This function is used to reset and test

the internal modem. It should be run

after setting any of the modem con-

ﬁguration parameters to make sure

an error was not made. It MUST be

run after changing the DIAL MODE

or DIAL RATE, otherwise these new values will not take effect until the

unit is turned off and back on again.

At the conclusion of the test a screen will appear indicating that the MODEM

CONFIGURED AND TESTED OK.

RROR CONDITIONS:

An error message will indicate a problem if the setup string is invalid or the

modem is not responding.

THIS COMMAND IS USED IN THE:

9100 9110 9700 9705 9710

9750