manual

MANAGEMENT FUNCTIONS

183

FUNCTION: DIAL RATE

FACTORY DEFAULT: ‘FAST’

CCESS INSTRUCTIONS:

1.) Select TERMINAL CONFIGU-

RATION from the MANAGE-

MENT FUNCTIONS menu.

2.) Select SET TERMINAL PA-

RAMETERS.

3.) Select TELEPHONE.

4.) Select the MODEM SETUP option.

5.) Select DIAL RATE.

ESCRIPTION:

The internal modem can be conﬁgured to send dial tones at one of three

speeds. The possible values are FAST (70 milliseconds), MED. (150 ms),

and SLOW (255 ms). The default value from the factory is FAST. After

changing the dial rate, be certain to execute the RESET/TEST MODEM

function. The new dial rate does not take effect until you do this.

RROR CONDITIONS:

There are no error conditions directly associated with this function, but if

calls seem to fail, try a slower setting.

THIS COMMAND IS USED IN THE:

9100 9110 9700 9705 9710

9750