manual

MODEL 91XX/97XX CONFIGURATION MANUAL
182
FUNCTION: DIAL MODE
FACTORY DEFAULT: ‘DTMF’
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Select TELEPHONE.
4.) Select the MODEM SETUP option.
5.) Select DIAL MODE.
D
ESCRIPTION:
The modem is configured to dial in either the touch-tone mode (DTMF),
or in the rotary (PULSE) mode. Consult with the local phone company
to determine which option is supported. After selecting the dial mode, be
certain to execute the RESET/TEST MODEM function. The new dial mode
does not take effect until you do this. The factory default for the function
is DTMF.
E
RROR CONDITIONS:
If the local phone exchange does not support touch-tone, and the terminal is
configured for DTMF mode, no calls will be completed. Rotary will work
on touch-tone systems, but should not be used if touch-tone is available.
Rotary mode will dial much slower than DTMF.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750