manual

MODEL 91XX/97XX CONFIGURATION MANUAL
168
FUNCTION: BACKUP NUMBER
FACTORY DEFAULT: NONE
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Select TELEPHONE.
4.) Select the BACKUP NUMBER option.
D
ESCRIPTION:
The Cash Dispenser communicates with your Processors’ host computer
over a dial up phone line. Some processors allow a backup phone number
to try if the primary number fails to connect.
When this function is selected, the current phone number is displayed (if
nothing appears on the screen, no number is set). Select CHANGE to blank
the current entry, and then enter the desired phone number. The phone
number may be up to 30 digits long. It can also contain a dialing prefix,
such as a ‘9’ for an outside line, if necessary. If you need to pause after the
prefix, place a comma in the number for a two-second delay at that point.
Pressing the <BLUE> key first, then the <0> key, followed by the <RIGHT
ARROW> select the comma. Make sure to enter the long distance prefix
‘1’ if you are dialing an 800 number or a toll long distance number. Do not
enter dashes in the number.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750