manual

MODEL 91XX/97XX CONFIGURATION MANUAL
160
option at the KEY MANAGE-
MENT main menu. At the
warning message, select YES
to continue.
14. The terminal will wait for key
injection to begin. At the PC,
initiate the key inject operation
for the second half of the se-
lected Master Key by clicking
the OK button on the Hit OK to Enter Next Key Part dialog:
15. The key inject operation will continue. At the conclusion of the operation
a confirmation screen will appear on the terminal, displaying a series
of CHECK DIGITS. Compare the CHECK DIGITS to the reference
set provided by the processor. If the CHECK DIGITS do not match,
contact your processor or service provider for assistance.
16. At the PC, return to the Key Inject Utility main window by clicking the
OK button on the 32 Character PIN (or MAC) Key Sent dialog:
17. At the terminal, press any key on the keypad to return to the KEY
MANAGEMENT main menu.
18. Repeat Steps 10 through 16 for the other Master Key (MAC or PIN),
as applicable.
19. Disconnect the data cable from the ATM. Close and Lock the control
panel. The procedure is complete.