manual

MANAGEMENT FUNCTIONS
159
8. The Select File to Load Keys dialog appears
9. Navigate to the location of the key file, highlight the file by clicking
on it, then click the Open button to open the file and return to the main
window.
10. If you have not already done so, select the INJECT MASTER KEYS
option at the KEY MANAGEMENT main menu. At the warning mes-
sage, select YES to continue.
11. The terminal will wait for key injection to begin. At the PC, initiate the
key inject operation for the first half of the selected Master Key (MAC
or PIN Master Key, as applicable) by clicking the corresponding Inject
Key button, as shown in this example:
12. The key inject operation will begin. At the conclusion of the operation
a confirmation screen will appear on the terminal, displaying a series
of CHECK DIGITS. Compare the CHECK DIGITS to the reference
set provided by the processor. If the CHECK DIGITS do not match,
contact your processor or service provider for assistance.
13. At the terminal, press any key on the keypad to return to the KEY
MANAGEMENT main menu. Select the INJECT MASTER KEYS