manual

MANAGEMENT FUNCTIONS
155
entry field. Enter the additional
KEY part, using the instructions
in Step 3 and Step 4. When all
KEY parts have been entered,
continue with Step 7.
7. After entering the KEY a sec-
ond time, a screen will display
a series of CHECK DIGITS.
Compare the CHECK DIGITS
to the reference set provided by
the processor.
8. If the CHECK DIGITS match,
press any key to return to the
KEY BLOCK selection screen.
Repeat Steps 1 through 5 for the
RIGHT KEY BLOCK.
9. If the CHECK DIGITS do not
match, press any key to return
to the KEY BLOCK selection
screen. Repeat Steps 1 through
7 for the KEY BLOCK that
failed. If the CHECK DIGITS still do not match, contact your proces-
sor or service provider for assistance.
10. After successfully entering the KEY into both KEY BLOCKS you will
be returned to the KEY MANAGEMENT main menu. The procedure
is complete.