manual

MODEL 91XX/97XX CONFIGURATION MANUAL
154
entry screen.
3. Enter the applicable 16-char-
acter KEY. To enter a digit
0-9, simply press the key that
has the desired digit. To enter
a Hex character (A through F),
first press and hold down the
<BLUE> key (<CTRL> key
on some model ATMs). While
holding down the <BLUE> key,
press the numbered key (1-6)
that corresponds to the charac-
ter you want to enter (1=A, 2=B,
3=C, 4=D, 5=E, 6=F). Release
the <BLUE> key.
Repeat for each character
in the KEY. If you make a
mistake, press <CHANGE>
(or <CLEAR>) key to clear
the entry and start over. Press
<OK> (or <ENTER>) to accept
the entry.
4. A prompt will appear on the
data entry screen, directing you
to enter the KEY a second time.
Enter the KEY again, using the
instructions in Step 3.
5. If the second entry of the KEY
does not match the first entry,
a warning message will appear
and you will be returned to the
KEY MANAGEMENT main
menu. Select the ENTER PIN
MASTER KEY option again
and start over at Step 1.
6. If the second entry of the KEY matches the first entry, you will be
prompted to enter ‘ANOTHER KEY PART’. In most instances you
will answer NO to this prompt and continue with Step 7. If a second
KEY part is required by your processor, select YES to display a data