manual

MODEL 91XX/97XX CONFIGURATION MANUAL
152
5. If the second entry of the KEY
does not match the first entry,
a warning message will ap-
pear and you will be returned
to the KEY MANAGEMENT
main menu. Select the ENTER
MAC MASTER KEY option
again and start over at Step 1.
6. If the second entry of the KEY
matches the first entry, you
will be prompted to enter ‘AN-
OTHER KEY PART’. In most
instances you will answer NO to
this prompt and continue with
Step 7. If a second KEY part
is required by your processor,
select YES to display a data
entry field. Enter the additional
KEY part, using the instructions
in Step 3 and Step 4. When all
KEY parts have been entered,
continue with Step 7.
7. After entering the KEY a second time, a screen will display a series of
CHECK DIGITS. Compare the CHECK DIGITS to the reference set
provided by the processor.
8. If the CHECK DIGITS match, press any key to return to the KEY
BLOCK selection screen. Repeat Steps 1 through 5 for the RIGHT
KEY BLOCK.
9. If the CHECK DIGITS do not match, press any key to return to the
KEY BLOCK selection screen. Repeat Steps 1 through 7 for the KEY
BLOCK that failed. If the CHECK DIGITS still do not match, contact
your processor or service provider for assistance.
10. After successfully entering the KEY into both KEY BLOCKS you will
be returned to the KEY MANAGEMENT main menu. The procedure
is complete.