manual

MODEL 91XX/97XX CONFIGURATION MANUAL
148
FUNCTION: SECONDARY DESCRIPTION
(9750)
F
ACTORY DEFAULT: ‘NONE
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Select CASSETTE SETUP.
4.) Choose the CASSETTE PARAMETERS option.
5.) Choose a cassette (A, B, C, or D).
6.) Select the DESCRIPTION option.
7.) Choose the SECONDARY DESCRIPTION option.
D
ESCRIPTION:
The SECONDARY DESCRIPTION provides a location for other information
of general interest or information required by law.
To enter a number, press the key that has that number. To enter a letter,
first press the BLUE key, then press the key that has the letter you want.
The first press of the key will display the first character above the number.
Subsequent presses will display the other characters in sequence. When
the character you want is displayed, press the <RIGHT ARROW> key ‘to
lock’ in the letter. If the next character is a letter, the BLUE key must again
be pressed first.
The description of a NON-CASH item may contain up to 28 alphanumeric
characters.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750