manual

MODEL 91XX/97XX CONFIGURATION MANUAL
140
FUNCTION: VALUE (9750)
F
ACTORY DEFAULT: ‘$0.00’
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Select CASSETTE SETUP.
4.) Choose the CASSETTE PARAMETERS option.
5.) Choose a cassette (A, B, C, or D).
6.) Select the VALUE option.
D
ESCRIPTION:
The VALUE function allows the operator to set the value of a cash or non-
cash item in a particular cassette. For cash, VALUE must be the denomi-
nation of the currency currently inside that particular cassette and must be a
whole dollar amount without cents. For non-cash, VALUE is the face value
of that particular item within the cassette and can be any value. The default
setting for VALUE is $0.00
E
RROR CONDITIONS:
An error code will occur when a non-whole dollar amount is applied to
a cash cassette. Example, setting the cassette to CASH and entering the
VALUE as $5.15 will cause the terminal to indicate Error# 186 Bill Size
Not Configured.
ENTER NEW AMOUNT THEN PRESS “ENTER”
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750