manual

MODEL 91XX/97XX CONFIGURATION MANUAL
134
FUNCTION: FAST CASH AMOUNTS
FACTORY DEFAULT: PROCESSOR-
SPECIFIC
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Select CASSETTE SETUP.
4.) Choose the FAST CASH AMOUNT option.
D
ESCRIPTION:
During a withdrawal transaction the FAST CASH screen prompts the cus-
tomer to select the amount of the withdrawal from a list of five convenient
amounts. These amounts are entered by the terminal operator using the
FAST CASH AMOUNT function. Up to six digits (more with software ver-
sions that support extended field lengths) can be entered into any data field
accepting a monetary value.
Selecting this function displays the FAST CASH SCREEN AMOUNTS
screen. Press the screen key next to the amount to be changed, and it will
begin to blink. Enter the new amount (whole dollar amount only), and then
press the <OK> key. The value will replace the blinking amount.
The amounts entered must be even multiples of the denomination in the
cassette. The amounts do not have to be in any particular order, although
typically, they increase in value moving from upper left and down, then
upper right and down. DO NOT enter an amount that is larger than the
MAXIMUM WITHDRAWAL AMOUNT.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750