manual

MANAGEMENT FUNCTIONS
123
FUNCTION: SRECHARGE AMOUNT
FACTORY DEFAULT: ‘$0.00’
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select SET TERMINAL PA-
RAMETERS.
3.) Choose the SURCHARGE
MODE option.
4.) Choose the SURCHARGE AMOUNT option.
D
ESCRIPTION:
The surcharge amount will be entered directly on the SURCHARGE MODE
screen. The value you enter here will be displayed to the user in the surcharge
notification message that was selected via the SURCHARGE OPTIONS
SCREEN function. Press the SURCHARGE AMOUNT menu key. The
ENTER NEW AMOUNT AND PRESS ‘OK’ prompt will appear. Enter a
new value. This value will appear in the “AMOUNT = _ _ _ _ _” field that
will appear on the SURCHARGE MODE screen. The value will be stored
in the terminal and displayed to the customer in the surcharge notification
message. See Error Conditions: for additional information on this feature.
E
RROR CONDITIONS:
It is important to understand that processor or network rules and/or ap-
plicable commerce laws ultimately determine the type and amount of any
surcharge that may be assessed against a transaction. The surcharge values
that you enter will be displayed to the customer and MUST match the actual
surcharge rates established by your processor or other applicable regulatory
agencies!
Manually changing the SURCHARGE AMOUNT to a lower or higher
amount does not automatically change the surcharge collected by the pro-
cessor for a transaction. It will only change the surcharge amount displayed
during the surcharge-warning message when it is shown to the customer and
not the actual fee collected for the transaction.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750